Contact Us

Tel:+86-0510-85950968

Fax:+86-0510-81010918

Mob:+86-18921299702

Whatsapp: +86-18921299702

Wechat: +86-18921299702

E-mail: wxht@wxhtsh.com

Add: No.88 Nanhu Middle Road, Binhu Town, Binhu District, Wuxi City,Jiangsu Province

Home > Knowledge > Content
Spiral plate heat exchanger quality control and application Jun 05, 2018

In order to ensure the user's use of results, the quality control requirements for the spiral plate heat exchanger are very strict. So you know what are the main points? In fact, in the production of spiral plate heat exchangers, the first thing to pay attention to is to strictly control the bending of the spiral plate. It is generally required that the bending per meter should not exceed three millimeters.

 

Second, when manufacturing spiral plate heat exchangers, the welding quality also needs to be strictly controlled. Among them, fixed-length column welding is mainly used for manual welding and contact welding. The quality of spot welding for spot welding of manual welding should be checked. If burn-through and leakage welding are found, besides repair welding, Spot welding quality is checked by 100%. The length of the spot welding can be controlled to ensure that the distance column will not fall off when the spiral body is rolled. It is necessary to pay attention to the occurrence of the phenomenon of biting meat on the board surface when starting arcing and closing the arc.

 

Third, the quality of flanging spiral plates in spiral plate heat exchangers will directly affect the overall performance. Therefore, in the processing, it is also necessary to correct and reshape it. This is because during the rolling process, the smaller the rolling radius, the greater the amount of bulging, and the need for further processing after the roll is formed. .

 

In addition, after the completion of production and processing, tests are also required to verify the performance and quality of the equipment. For example, in the pressure test, the derrick rack tooling must be used for the detachable spiral plate heat exchanger to prevent axial deformation of the product. During the test, one end of the channel is filled with compressed air, the other channel is filled with human water or the device is placed in water. The welding quality of the product can be checked to ensure that no internal leakage occurs between the two media.

 

So far, spiral plate heat exchangers have been widely used in the domestic market. For users, under the same conditions, the use of spiral plate heat exchangers will significantly reduce production costs. Moreover, the device is ideal for convection heat transfer with steam condensation and no phase change, and can also be used for boiling heat transfer.

http://www.wxhtshen.com/